Chupitos fluorescentes para Halloween

Estos chupitos fluorescentes para Halloween están hechos por capas con aguardiente y ron, además de riboflavina para que brillen bajo la luz negra. Son espeluznantes, coloridos y perfectos para fiestas. Solo necesitas unos pocos ingredientes para lograr esta bebida impresionante.
Ingredientes
- 1/2 Ounce DeKuyper Strawberry Pucker (or similar schnapps)
- 2 Ounces coconut rum (I used Malibu)
- Riboflavin (Vitamin B12) (you need capsules not tablets )
Preparación
- 1
pour: Using a measuring cup with pour spout, pour strawberry pucker into a graduated cylinder. Leave the remnants of the strawberry pucker in the measuring cup after pouring. You’ll need the leftover droplets for the next step.
- 2
Add half the coconut rum to the measuring cup. When it combines with the remaining strawberry pucker, it will produce a pink-tinted rum.
- 3
sprinkle: Gently open a single Riboflavin capsule. With a light hand, sprinkle a small amount of the yellow powder on top of the tinted rum. A little bit of the powder goes a long way. Mix the powder into the rum. The powder will turn the rum from pink to orange.
- 4
pour: Tip the graduated cylinder slightly at an angle and SLOWLY pour the orange-tinged rum down along its inside wall.
- 5
mix: Add remaining coconut rum to your measuring cup. Again, sprinkle a very small amount of the Riboflavin onto the surface of the rum. Mix in the powder. The Riboflavin will turn the rum yellow.
- 6
add: Repeating the process in step 3, add the yellow-tinted rum until all of the rum has been transferred to the graduated cylinder.
- 7
Serve in vials or in test tubes with a rack.
Cocínala con la receta original
Esta receta es de xoxobella.com. En su web tienes las fotos, las notas y los consejos del autor: es el mejor sitio para cocinarla.
Ver la receta en xoxobella.com